Home > News > Content

Good Compactness and Strong Di Ductile Cast Iron Dismantling Joints


Ductile Iron Pipe Joint Product Detail

Ductile Iron Pipe Joint Product Description
 Specifications
1.Dismantling joint 2.ISO2531/EN545/BS4772 3.PN10/16/25/40 4. DI/CS/CI/SS 5. DN80-DN3000
1. Dismantling joint
2.Dismantling Joint
The dismantling joint is designed to be the final closing piece in the pipe network, to ease the assembling and disassembling for later maintenance of a pump or valve. A standard adjusting range of 50mm on length and a small lateral and angular misalignment can be accommodated. This adjustability of the dismantling joint facilitates for easy removal of pumps and valves in circumstances of inspection, maintenance or replacement.
3.Features and Benefit:
·Compensate for differences in flange to flange distance ·Simplify the installation of pipelines ·Integrate a valve or pump into a flanged pipe network ·Flange connection, flange drilling can base on DIN PN6/16/25, ANSI CLASS150/300, JIS, EN, etc ·Reduce assembling time ·Dismantle for service, inspection and maintenance ·Epoxy powder coating and bolting made of steel ·Drinking water approved
4.Specifications
Nominal diameter:DN80mm to DN3000mm
Maximum working pressure:4.0 Mpa
Vacuum KPa(mmHg)44.9(350)
Operating temperature:-20°C-80°C
Corrosion resistanceGood
Applicable mediaSea water, drinking water, slurry, industrial sewage.
 
5.Components/Materials/Functions
No.ComponentsMaterials
1Long PieceDI/CI/CS/SS
2Short PieceDI/CI/CS/SS
3SealingEPDM
4GlandDI/CI/CS/SS
5StudDI/CI/CS/SS
6NutCS/SS
7GasketCS/SS
Note: · Flanges are according to DIN PN16, ANSI/JIS/EN standard can be supplied upon request. · Design Pressure: 16 bar. · Rubber: EPDM, NBR, NEOPRENE or upon request. · Materials are various to meet per requirement.


Good Compactness and Strong Di Ductile Cast Iron Dismantling Joints